0.;Block;
1.;Open;
2.;Close;
3.;Store;
4.;Restore;
5.;Exit;
6.;Service;
7.;Editor;
8.;Analysis;
9.;Import;
10.;Anagraph;
11.;Comparator;
12.;Accuracy;
13.;View point;
14.;Construction;
15.;Adjustment;
16.;Options;
17.;Help;
18.;Result;
19. ;Create Documents;
20./;View/Print;
21. ;Delete results;
22. /;Setup printer/font;
23.;Export;
24.;Calculation;
25.;Aerial Triangulation "BlockMSG";
26.  ;Active block ;
27.English;Russian;
28.  ;Creation of Result Tables;
29.   ; Create Catalogue of Control Points;
30.   ; Create Catalogue of Images;
31.   ; Create Catalogue of Terrain Points;
32.     ; Create Catalogue of Image Points' Coordinate;
33.     ; Create Catalogue of Regular terrain points;
34.    ; Create Catalogue of Control terrain Points;
35.    ; Create Catalogue of Model Data Setup;
36.  ; Analysis of models conjunction;
37.   ; Edit of block data;
38.     . ; Adjustment with provision of rough mistakes;
39.  .; Accuracy estimation is impossible;
40.  .   ; Exchange file is corrupted. Create block again;
41.    ; Accuracy analysis of terrain point coordinates;
42.  ; Choice of view point;
43.   ; No file ;
44. ; Aerial triangulation block;
45.    ; Error or focal distance data;
46.    Lx; Error of distance Lx data;
47.    Ly; Error of distance Ly data;
48.  ;Image model ;
49.   ;  Strip ;
50.     ; Error at analysis of measurement data;
51.  ; Project data;
52.  ;Block conversion;
53.     : ; terrain triangulation block   Block name;
54.   :  ;  Block number: ;
55.  ; Control points' coordinates;
56.   ; General data of current strip;
57.  ; Strip measurements data;
58.     ; Non-digital symbol in line;
59.     ; Block formation over StereoAnagraph Measurements;
60. ; No file;
61.     ; with coordinate system;
62.   ; Error at file writing;
63.     ; with coordinate system;
64.Procedure ParWr:  . cos ; Procedure ParWr: non-orthogonal matrix of directed cos;
65.  ; Parameters are not calculated;
66.  ; Parameters are wrong calculated;
67.  cos  ; Distortions in matrix of directed cos;
68.   .; Aproximate calculation of rotation parameters;
69.   ; Error at file opining;
70.    ; Error at file reading;
71.  ; number of models;
72.  ; matrix of model links;
73.   ; matrix of model situations;
74.  :   ;quantity of extra sub-matrix: previous   ;
75.    ;   current;
76.   :     ; Error matrix of links;
77.    ; Error of file writing;
78..$08   ;..$08 matrix of model links;
79..$08   ;..$8  matrix of model situation;
80.   ; matrix of model links;
81.  ; Optimization of model order;
82.   ;Image points     ;
83.         ; Devision on zero at determination of borders models on picture plane;
84.   Romb; Error in program Romb;
85.   DarstellReadViewModel;Error in Program DarstellReadViewModel;
86. ; No file ;
87.   DarstellViewModel;Error in Program DarstellReadViewModel;
88.     30 ; Exchanged File contains more than 30 lines;
89.  ; Donetsk Technical University;
90.: 83000,, . , 58  , . (0622)91-07-81 E-mail:mogilny@gis.dgtu.donetsk.ua; grounds: Ukraine,83000,Donetsk, Artema str., 58 Geodesy Department, Tel. (0622)91-07-81 E-mail:mogilny@gis.dgtu.donetsk.ua;
91.Copyright   .. 1997-2003 .; Copyright  Sergiy G. Mogilny 1997-2003 .;
92.  ; terrain Triangulation;
93. 4.2  17.01.2004 .;Version 4.2  17.01.2004.;
94.   ; Wrong number of result page;
95. ; terrain triangulation block;
96. .   N; Focus distance. Model N;
97. (d)  ; Parameters (d) of rotation matrix;
98.   ,,   ;Angels of Interior Orientation Elements Alfa, Omega, Capa of Left Image;
99. (al)  cos  ; Matrix (al) directed cos of the left image;
100. (ar)  cos  ; Matrix (ar) directed cos of the right image;
101.   ,,   ;Angels of Interior Orientation Elements Alfa, Omega, Capa of the Right Image;
102.  ; Image   ;
103.   .; not on model;
104.       param =;Inadmissible result of adjustment method while model conjunction param=;
105.    ; Model block formation from;
106.    ; Error at file opening;
107.     ; Adjustment result by Gauss;
108.     ; Adjustment result by Laplas;
109..kmp                 ;.kmp      Model conjunction without excluding of rough mistakes;
110..kmp                  ;.kmp        Model conjunction with excluding of rough mistakes;
111.                       ;                Deviations on the control point;
112.       ; Error in file of control points reading;
113.         ; ground point coordinates not find          ;
114./;plan/elevati;
115.    ;   plan     ;
116.    ; elevation  ;
117.       ;Average deviation of link point coordinates        ;
118.          ;Average deviation while searching rough mistakes in link points   ;
119.      :;Average deviation in meters of model conjunction:   ;
120.                                 ;                                    at link points;
121.                                   ;                                 at ground points  ;
122.     ;  at ground    ;
123.      ;Average deviation of ground points      ;
124.      ;       Average deviation of tie points  ;
125.        ;Average Deviation of tie points by Gauss          ;
126.     ;  at ground    ;
127.        ;     Average Deviation at ground points by Gauss  ;
128.      :;Average Deviation in meters of model conjunction:;
129.                                 ;                                    at tie points;
130.                                   ;                                   at ground points;
131.                                         ;                            Catalogue of terrain point coordinates        ;
132. : ; Block name: ;
133.  N                                                 ;  N                              Point Coordinate               Quantity;
134.                 ; Average Maximum discrepancy of coordinat            ;
135.                +----------------------------------------;       Point name       +----------------------------------------;
136. ----------+----------+----------  ; image,         ----------+----------+----------    Note    ;
137. /                           X           Y           Z      ;                               X           Y           Z      ;
138., .           Dx        Dy        Dz                ;  piece            Dx        Dy        Dz                ;
139.                                          ;                             Catalogue of control points coordinates      ;
140. : ;Block name: ;
141.  N                                              ;  N                               Point Coordinate              ;
142.                         ;     Coordinate      deviation              ;
143.                +--------------+------------+------------;       Point name       +--------------+------------+------------;
144.----------+----------+----------  ;----------+----------+----------     Note   ;
145. /                          X            Y           Z      ;                               X           Y           Z      ;
146./;plan/elevat.;
147.    ;plan        ;
148.    ;elevation   ;
149.  ;Total number of control points;
150.               ;                   plan;
151.               ;              elevation;
152.      ;Average deviation in meters at the control points ;
153.                                           ;                                          in plan;
154.                                         ;                                     in elevation;
155.      ; Error at file opening;
156.   ; model can not be linked;
157.   IspCos,   ; error in procedure IspCos, model;
158.   ParWr,   ; error in procedure ParWr, model;
159.   ; Process of model conjunction is running;
160.      ; Admittance on the end of iterations contains non-digital symbol;
161.      param =; Inadmissible method result(value) of model links adjustment param =;
162.   (  ) ; Model conjunction is running (search for rough mistakes);
163.      ; Model conjunction without search of rough mistakes;
164.       ; Model conjunction in mode of search for rough mistakes;
165.    PRechNetz; Accident at the beginning of PrechNetz;
166.        ; Non-digital symbol in the Average ordinate of the net;
167.        ; Non-digital symbol in the Average latitude of the net;
168.   :  ; Maximum correction in iteration: last;
169.  ; previous   ;
170.  :  ;iteration number: external ;
171.  ; internal   ;
172.   :  ;Maximum correction in iteration: last     ;
173.   ;  previous   ;
174.  :  ;iteration number: external;
175.  ; internal;
176.  ?;Continue external iterations?;
177.       PRechNetz ; Accident at account of Gauss projection in PRechNetz;
178. .  N; Focus distance. Model N;
179. (d)  ; Parameters (d) of rotation matrix;
180.   ,,  ;Angels of Interior Orientation Elements Omega  Phi , Kappa of the Left Image;
181. (al)  cos  ;Matrix (al) of direct cos of the left image;
182. (ar)  cos  ; Matrix (al) of direct cos of the right image;
183.   ,,  ;Angels of Interior Orientation Elements Omega,  Phi , Kappa of the Right Image;
184.   UN ; MATRIX of normal equations UN is DEGENARATED;
185.. .     ;Average square parallax of image model ;
186.   ; in strip   ;
187.     ; equals to ;
188..;mm;
189.    ;Mean square amount of remaining parallax            ;
190.      ;ITERATIONS ARE NOT  RECONVERGED . INTERIOR ORIENTATION  WAS NOT DONE;
191.    ;Parameters of rotation are not normalized;
192.   ;Image Model  ;
193.    ;  strip    ;
194.    ;Mean square amount of remaining parallax            ;
195.  :   ;quantity of extra sub-matrix: previous   ;
196.    ;  current  ;
197.   :; Error at matrix of links;
198.    ; On digital in line;
199.   ; set zero;
200.   ; Error at file opening;
201.   ; amount of model;
202.    ; Error at file writing;
203.  ; amount of model;
204.   ; matrixes of model links;
205.   ; matrixes of  model situation;
206.     ; Error at opening file for reading;
207.   ; matrixes of model links;
208.    ; Error at file reading;
209.  ; amount of models;
210.    ; Error in file reading;
211.   ; matrixes of model links;
212.   ; matrixes of  model situations;
213.  ; Optimization of image situation;
214.    ;Error at file opening;
215.     :  ; No ground point with name:;
216.   ; No file;
217..$07     ;..$07 with coordinate system;
218.   ; Error at file writing;
219. ParWr:   ; procedure ParWr: wrong parameters determination;
220.    ;  Error at file reading;
221.  ; amount of models;
222.    mat_str.$01   ; Error at reading mat_str.$01 the matrix of model links;
223.   ; Error at reading from;
224.   ; matrix model situations;
225.   zwisch1.dat ; No file zwisch1.dat;
226.     30 ; Exchange file contains more than 30 lines;
227.      ; Error at file opening;
228./;plan/elevati;
229.    ;plan        ;
230.    ;elevation   ;
231.       ; After adjustment Average deviation on the ground points;
232.                                      ( ):;                                 in plan ( meters):;
233.                                    ( ):;                             on height (meters):;
234.     ;  ground     ;
235.   ;  ground   ;
236.     ; Error at file opening;
237. .    ; terrain Triangulation Block. Images setup elements;
238. .   ; Focus distance. Image model;
239. (d)  ; Parameters (d) of tumbling matrix;
240.    , ,   ; Angels of external orientation elements Alfa, Omega,  of the left image;
241. (al)  cos  ; Matrix (al) of direct cos of the left image;
242. (ar)  cos  ; Matrix (al) of direct cos of the right image;
243.    ,,  ; Angels of external orientation elements Alfa, Omega,  of the right image;
244.                      ;            Catalogue of ground points coordinates ;
245. : ; Block name: ;
246. N                                               ; N                                 Point coordinates            ;
247.                         ;    Coordinate deviation                    ;
248.                ;       Point name       ;
249.  ; Note       ;
250.    ;Catalogue of image orientation elements  ;
251. : ;Block name:;
252.     ;   Coordinates of Photo center      ;
253.  , .;Angle of the image slop    ;
254.          ;   Image name      ;
255.          ;Catalogue of terrain point coordinates     ;
256. : ; Block name  ;
257.                            ;         Point coordinates               Amount ;
258. C..  .               ;Average  Average square coordinates/meters            ;
259.          ;  Point name      ;
260.; image  correcti;
261.  ;  Note      ;
262., .     ;  piece   mcm   ;
263.          ;Catalogue of terrain point coordinates     ;
264. : ; Block name: ;
265.                            ;           Point coordinates            Quantity;
266. ;Average  ;
267.           ;  Point name       ;
268.  ;image   correcti  Note      ;
269.     ;     ;
270., .     ;  piece   mkm   ;
271.          ;Catalogue of image points coordinates;
272.   ,    ., ; Point coordinates, mm  correct,mkm;
273.           ;  Point name       ;
274.;Note      ;
275./;   ;
276.     ; error in file opening  ;
277.           ;Catalogue of control points coordinates    ;
278. : ; Block name;
279.                         ;            Point coordinates           ;
280.             ;    Coordinate      deviation   ;
281.           ;  Point name       ;
282.  ; Note       ;
283. / ;     ;
284.   ; discrepancy in the manes of control points;
285./;plan/hight  ;
286.    ;plan        ;
287.    ;height      ;
288.    ; Control point was not found;
289.  ; at whole control points;
290.               ;                   plan;
291.               ;                 hight;
292.      ; Average deviation in meters on the control points;
293.  ; on plan;
294.  ; on height;
295. ;no file;
296.    ; need in preliminary block construction;
297.     ; error at file opening;
298.       ; Deviations in meters on the control point;
299.     ; error at file opening;
300.       ;Deviations in meters on the control point  ;
301.  ; Setup parameters for calculation;
302.    ; O p t i o n s;
303.  ; Date of coordinate system;
304.  ; Equator coordinates;
305. Y    ; Ordinate Y from axial meridian;
306.   ; input Average latitude of the net;
307.    ; input Average ordinate in km;
308.; Setup;
309.; Exit;
310.; Help;
311.  ; Search for rough mistakes;
312. . ; Exclude systematic mistakes;
313.   GPS;Account of displacement GPS;
314.  ; Account of curvatures of the Earth;
315.  -;Account of Gauss-Kruger projection;
316.   ; Admittance on the end of iterations;
317.  ;Casual mistakes are growing;
318.     ; Non-digital symbol in the Average latitude of the net;
319.     ; Non-digital symbol in the Average ordinate of the net;
320.       ; Admittance on increasing an influence of rough mistakes contains non-digital symbol;
321.   ; Error at file reading;
322.  24  ; Amount of  Scenes is more than 24 for one point;
323. ; Interruption of calculations;
324.      ; Error at revision of terrain point coordinates ;
325.  ReadKlet  ist > it; Wrong use of ReadKlet  ist > it;
326.      ; non-digital symbol in point coordinate ;
327.  .; Ignore point;
328.    ; No file   ;
329.     X   ; Non-digital symbol in X coordinate of ground point  ;
330.     Y   ; Non-digital symbol in Y coordinate of ground point  ;
331.     Z   ; Non-digital symbol in Z coordinate of ground point  ;
332.      ; Non-digital symbol in point coordinate;
333.                      ;  In catalogue of ground points             ;
334.     ; Error at calculation of parameters of rotating models;
335.  ; Block files formation;
336.       ; Total amount of scenes on images          ;
337.    ; Image parameters are bad normalize;
338.                        ; Total amount of images in block          ;
339.           ; PROTOCOL OF BLOCK ADJUSTMENT      ;
340.         ; Non-digital symbol in point coordinate  ;
341.   ; Ignore point;
342.     ; No file with models   ;
343.      X   ; Non-digital symbol in approximate coordinate X of ground point    ;
344.      Y    ; Non-digital symbol in approximate coordinate XY of ground point  ;
345.      Z    ; Non-digital symbol in approximate coordinate Z of ground point   ;
346.      ; nonallowed symbols on the point  ;
347.                      ;  in Catalogue of ground points             ;
348.!     ; NOTE! Not enough ground points for geodetic orientation;
349. .   N ; Focus distance. Image Model N;
350.     ; Error in rotation matrix calculations;
351.                       ; Number of models in block;
352.  ; Block file formation;
353.    ; No file   ;
354.  ; Number of scenes;
355.    ; frequentative ;;
356.    ; number of points on models;
357.          ;      are frequentative among them;
358.    ; Number of terrain control points;
359.      ; No ground point;
360.     ; Number of equalizations of model links;
361.         ; PROTOCOL OF BLOCK CONSTRUTION;
362.; Done;
363. ,   ; Type of multinomial approximating systematic mistakes;
364.  ; Setup a prospect centre;
365.; Apply;
366.; Cancel;
367.; View;
368. ; No file;
369.    ; Non-digital symbol in the model  number;
370.; Plan;
371.; Scale;
372.; Save;
373.; plan;
374.; Linking;
375.; more;
376.; less;
377.; Find;
378.; Save;
379.; Exit;
380.; Point;
381.; Frame;
382. ; Save as;
383.(*.kmp)|*.kmp|""(*.del)|*.del|(*.*)|*.*|.(*.zmr)|*.zmr;Stand(*.kmp)|*.kmp|Delta(*.del)|*.del|All(*.*)|*.*|Store(.zmr)|*.zmr;
384.     .   .;Adjustment is done with provision for rough mistakes. Evaluation of accuracy is impossible;
385.   ?; Save the change in block?;
386.     ; Analysis of deviations on the point;
387.    ; Point coordinate accuracy;
388.   ; Analysis of deviations in frame;
389.     ; Analysis of accuracy of point coordinates in frame;
390.   ; Error at file opening;
391.    ; accuracy of point coordinates in frame;
392.  ; Structure of file is destroyed;
393.; Elevation;
394.; Plan;
395.; Control;
396.      ;The ground point does not contain the code of rigidity;
397.     ;Error in addressing of units of normal equations;
398.   ; Error at file opening;
399.   BauGleich;Emergency event in BauGleich;
400.    Norm,  GaussBlock ;Disturbance in a structure of a Matrix Norm, procedure GaussBlock ;
401.   ;The image is not connected  ;
402..     ;. Code   ;
403.    IspCos,   ;Error in a procedure IspCos, model ;
404. ;Block adjustment;
405.   ;Compiling and solution of the equations;
406.    :; Number of terrain ground points;
407.                       -:   ;                             plan-hight:   ;
408.                               :   ;                                   plan:   ;
409.                               :   ;                                  hight:   ;
410.      :; Number of difined terrain points   :;
411.          ;Number of the equations in the block      ;
412.             ;Number of surplus measurements in block   ;
413.   :;Maximum correction to angles:;
414.   ; to coordinates ;
415.    X ; Average correction to X ;
416.  Y ;on Y ;
417.     ;The adjustment performed with elemination of biases;
418.     ;The adjustment performed without elemination of biases;
419.   ;Estimation of points coordinates accuracy;
420.   ;The definition of parameters of biases;
421. ;  Own numbers;
422.  ;Parameters of systematic errors;
423.  ;Limits of systematic errors;
424.    ;Limits of systematic errors in mm;
425.         :  ; on an axes : from ;
426.  ;up to ;
427.         Y:  ; on an axes Y: from ;
428.       :     ; Limits of systematic errors on a image in mm: on an axes  from ;
429.   Y  ;on an axes Y from ;
430.  ?;Take into account systematic errors?;
431. ?;Continue iterations?;
432.   ;Calculation of adjusted coordinates of points ;
433.     ;Mean square orrections to photocoordinates;
434.                                  ;                    on an axis  in mm     ;
435.                           Y       ;                    on an axis Y in mm     ;
436.                        ;Error of a unit weight in mm                ;
437.     ;  weight units  ;
438.C   X ;Average correction on X ;
439.  Y ; on Y ;
440.   ;View and print results;
441.;Print;
442.;Exit;
443. ;Calculation log;
444.. ;Connection of models;
445. ;Ground points;
446.;Images;
447. ;Terrain points;
448. ;Image points;
449. ;Ordered points;
450. ;The control of a construction;
451. ;The control of adjustment;
452.;Block;
453. ;String is ignored;
454.;Anagraph;
455.;Comparator;
456.     ;Incorrect code of projection center coordinates;
457.    ...    '/';In a string with the data odd number of symbols '/';
458. ;The string is ignored;
459.    ;Before a line the coordinates of a point are missed;
460.      ;The structure of the data in a string is broken ;
461.       ;Not a digital symbol in a string   ;
462.        ;Incomplete string given about average errors  ;
463.      ;Incomplete string of angular elements   ;
464.   GPS;Account of parameters of GPS;
465.  ;Account of elements of rotation;
466.;Delta;
467.;Demoversion;
468.;Standard;
469.(*.prj)|*.prj|(*.inf)|*.inf|(*.000)|*.000|(*.*)|*.*|;Project(*.prj)|*.prj|Common(*.inf)|*.inf|Measurements(*.000)|*.000|All(*.*)|*.*|;
470.  ;Guardant Hardlock not found;
471.  ?;Continue internal iterations?
472. /                           X           Y           Z                      ;                               X           Y           Z         Omega     Phi       Kappa   ;
473. ;System left;
474. ;System right;
475.   ;Mistake incoordinate system orientation;
476.      ;The angular elements of the photo are not calculated ;
477.(    );( by results of  models conjunction );
478.(    );( by results  of adjustment);
479.;Construction;
480.;Adjustment;
481.  ?;To optimize the order of models?;
482.  ?;To optimize the order of photos?;
483.    ;Non-numerical character among iterations;
484.   ;Invalid tag of coordinate system;
485.     ;Emergency event in the installation of coordinate system;
486.    ;The file with models is not read;
487.      ;Error in creation of the file with a point of outlook;
488.     ;Invalid value of a weight unit from adjustment;
489.     param = ;Invalid value of the method of adjustment param =;
490.       -;Indicate a mean latitude or do not nie the projection of Gauss - Krueger;
491.     ;The value of a mean latitude contains a non-numerical character;
492.         -;Indicate a mean ordinate in km or do not nie the projection of Gauss - Krueger;
493.     ;The value of a mean ordinate contains a non-numerical character;
494.  (  );The block of phototriangulation (adjusted by the method of  bundles);
495.   ;The numbering of photos is destroyed ;
496.      ;Error in opening the file with a point of  outlook;
497.    .;There are not ehough reference points within network;
498.      ;A mean ordinate of  network contains a non-numerical character;
499.       ;A mean latitude of the network contains a non-numerical character;
500.    BauPunkt ;Emergency event in BauPunkt ;
501. ; About..;
502. ;Updating of licence;
503.      ;Center of a snapshot does not contain the code of rigidity;
504.  :    ;The frame of the file is disturbed: there is no separator of reference coordinates;
505.  :    ;The frame of the file is disturbed: there is no separator of navigational data;
506.      ;Not a digital character in angle of leans of a snapshot;
507.      ;Angle of leans of a snapshot does not contain a code of rigidity;
508.  ;It is not enough of the navigational data;
509.    ;Errors at calculus of singular numbers;
510.      :;Increase of accuracy at the expense of usage of the navigational data:;
511.                   ;         in coordinates of centers of a photography in;
512.                                  ;         in angle of leans of snapshots in            ;
513.             ; Outcomes of the count of the navigational data;
514.|                    |           |             |       |;|                    |           |             |Lobe of residual influencing |;
515.|        |    |     |             |;|   The naming       |  Level of |   Value     |   in members of snapshots   |;
516.|           ||    |;|    of parameter    |definition | of parameter|;
517.  |        |;in coordinates|   in angle   |;
518.       |       |;   of centers |  of leans    |;
519.| :   ;|Position of antenna:;
520.  ;is computed;
521. ;not known  ;
522.|     ,        |;| lengthways, m      |;
523.|   ,        |;| crosswise,  m      |;
524.|    ;| Coordinate system  ;
525.| :;|  of navigating:    ;
526.|    ,     |;| beginning on X, m  |;
527.|   Y ,     |;| beginning on Y, m  |;
528.|   Z ,     |;| beginning on Z, m  |;
529.|             |;| scale              |;
530.|   ,.      |;| slope, rad.        |;
531.|     ,.      |;| roll,  rad.        |;
532.|  ,.      |;| turn,  rad.        |;
533.|   ,        |;| aweigh,     m      |;
534.    ;The parameters of the navigational data are not calculated;
535.  ,      ;Average error of coordinates, meters;
536.      ;The value of an average error  of coordinates contains a non-numerical symbol;
537.     ;The catalogue of the navigating data after adjustment of the block
538.     ;The catalogue of the navigating data after connection of models;
539.      ;Mean square orrections to navigating measurements;
540.                           X        ;                    on an axis X in m      ;
541.                           Y        ;                    on an axis Y in m      ;
542.                           Z        ;                    on an axis Z in m      ;
543.  ; Navigation;
544.     -   ;Adjustment with provision of rough mistakes- the accuracy is not estimated;
545. ;Navigation construction;
546. ;Navigation adjustment;
547.           ;    Image name      ;
548.                       ;       The calculated coordinates           ;
549.|             |;|     Amendment in coordinates   |;
550.  ;The structure of the data is broken;
551.(*.*)|*.*| -(*.dat)|*.dat|/.(*.txt)|*.txt;All(*.*)|*.*|Measurement -(*.dat)|*.dat|Ground/Navigation(*.txt)|*.txt;
552.  ;Choice of measurements of snapshots;
553.    ;Choice of geodetic coordinates of ground points;
554.  ;Choice of the navigating data;
555.   ;Inadmissible structure of a line ;
556.   ;The additional parameters are incorrectly chosen;
557.     ;Increase of influence of casual mistakes ;
558.   ;   Commercial;
559. -; Version -;
560.   ;Mistake of the reference to Hardlock;
561.  ;Number of HardLock is broken;
562.  ;Input of code of updating;
563. ;Code of updating;
564.  .;The license is updated successfully.;
565.  ;Save to file;
566.;Review;
567.;Request;
568.;Update;
569. ;Updating license;
570.;License;
571. ;Number of HardLock;
572.;Execute;
573.  ;Creation of request code;
574. ;Request code;
575.  ;Code error;
576.    ;Search of file with code of answer;
577.  ;Save to file;
578.    ;Mean square values               ;
579.             ;The maximal values               ;
580.   ;The protected mode;
581.  ;Load the program anew;
582.     ;The relative orientation of snapshots is not executed ;
583.  .; The model is excluded.;
584.   .;Is delivered under the separate contract.;
585.      ;The zones of geodetic and navigating coordinates do not coincide;

